Yale Smart Living CCTV
30 metres of Yale BNC cable, or up to 100 metres of continuous shielded cable.
No, although the DVR does supports audio input, to allow additional purchase of microphones.
This can be done in the playback option, using a USB memory stick.
This feature is not available.
Yes, via the USB port on the back of the DVR.
You can use HD720 cameras with HD1080 DVR, but not the other way around.
Yes, all Yale Hybrid DVR Hard drives can be upgraded to a maximum of 4TB storage.
Yes, you will need to purchase the CCTV/Alarm Link Adaptor (this can also be used with Yale Connected Smart Locks, as well as alarms or CCTV) and follow the instructions provided.
Not all alarms system connect to the Yale CCTV, only the EF-KIT2. With the EF-KIT2, you will need to purchase the CCTV/Alarm Link Adaptor and follow the instructions provided.
Yes, providing your DVR is connected to your home broadband you can view footage via the Yale CCTV App when connected to WiFi or 3G/4G.
Yes, all Yale cameras have infrared night vision and are equipped to function at night.
Yale CCTV cameras are currently wired.
No, you have to connect this directly into the router using an Ethernet cable.
From the Main Menu, hover over ‘Record’ and then move the mouse over ‘REC Config’ and left click to select.
Here you will be able to set your DVR to different recording formats
Unfortunately this feature is no longer available.
Left LED light - power light
Middle led light - green if recording
LED light to the right - will flash if being remotely accessed
Right click on the mouse, then left click on ‘Main Menu’. Hover over settings then move down to ‘General’. Left click on ‘general and here you’ll find the time zone.
For further information please refer to the installation manual included with your product, or view Yale’s Smart HD CCTV installation manual here (link to PDF found here http://www.yale.co.uk/en/yale/couk/productsdb/cctv/Smart-HD720-CCTV-System---2-Camera-/
You can access this QR code after installation by choosing “Quick Start” under the right click menu.
Via the HDMI/VGA Ports on the back of the DVR.
The only way to start using your DVR and navigate through the DVR menu’s is to connect and use the provided Yale mouse.
Please refer to the installation manual included with your product, or view Yale’s Smart HD CCTV installation manual here (link to PDF found here http://www.yale.co.uk/en/yale/couk/productsdb/cctv/Smart-HD720-CCTV-System---2-Camera-/
Check the hardrive. Go into the professional menu and click on HDD manage. Check capacity, format disk if necessary (please note this will wipe all stored information).
***GENERAL MAINTENANCE ADVICE *** we advise to maintain the hardrive, by having auto re-boot set to 'ON' in the settings section of the main menu.
Make sure the connectors are securely in, also check the power supply to the cameras.
You may need a system upgrade, for further information please e-mail firstname.lastname@example.org
Try the factory default first in case this has not been changed changed. Admin is the username and leave the password blank.
The CCTV password is case sensitive and will need to be entered exactly how it was set up. If not please request an override password from email@example.com
Lighting around the camera at night will cause this, such as security lights or street lamps. Try relocating the camera to test.
Please e-mail firstname.lastname@example.org with your serial number and proof of purchase and we will provide a 24hr override code to reset.
Please check your phone settings to see what version your phone is running on. Most phones running Android 4.0 and above, or IOS version 7.0 and above will be compatible.
This is because settings have been changed or more cameras have been added.
For example, if your DVR is set to 'always record' then this will give you the shortest recorded time period.
If you select an option such as 'motion detection', this will give you a longer recording period as less data is being stored.
The same applies to the number of cameras used on the system. An increase in cameras may reduce the recording time period due to an increased amount of data being stored.
This means that the resolution has been altered, you will need to connect this to a monitor to change the resolution back to default, or factory reset to take this back to the default.
When setting up the app, please make sure you register the serial number and not the IP address, as this will not allow you to connect to a 3G/4G network.
Please follow the below trouble shooting options:
Yes, on DVRs marked as ‘HYBRID’. Please refer to Yale’s guidance document here (link to PDF on this page http://www.yale.co.uk/en/yale/couk/productsdb/cctv/Smart-HD720-CCTV-System---2-Camera-/)
That depends on what CCTV kits you have. Please see the list below:
Yes, dependent on the model of your DVR you can either add an additional 2 or 4 cabled BNC cameras, or add IP cameras via WiFi.